Vacuum Emulsifying System

Model URJ Vacuum Emulsification Mixers are specially designed for processing cosmetics and ointments. They are composed of a pretreatment Jacketed Oil or/and Water Tanks, vacuum emulsifying mixer (Jacketed), vacuum pump, hydraulic system, tilting discharge system, and electric control system.

Structure:
With 3-layer structure, upper and lower end sockets. The upper end socket is connected to the tank body with flange between them. The internal layer of tank body is made of 5 mm thick SUS316L stainless steel and interior polished in 400 MESH (sanitary level). The middle layer of tank body is made of 4mm thick SUS304 stainless steel and can stand max. Working pressure is 0.09 MPa(coil tube). The external layer of tank body is made of 2 mm thick SUS304, and exterior polished in 300 MESH (sanitary level). All the welding seams shall be polished after rubdown, and as to the treatment interface, turned over edge arc transition is adopted. The heat preservation layer is made of PU polyurethane foaming.